Removal and installation of the driver's airbag
Removing the driver's airbag
1. Connect a diagnostic tool and use it to disable the airbag processor.
2. Turn the steering wheel a quarter of a turn.
3. Unhook one of the clips (1), by pushing it in the direction (2) flat screwdriver.
4. Unhook the clip on the other side of the airbag in the same way.
5. Unlock connector (s) driver airbags.
6. Disconnect connector (s) and remove the driver's airbag.
Installing the driver's airbag
1. Installation is made in an order, the return to removal.
2. Unlock airbag processor
3. Turn on the ignition and check that the malfunction indicator on the dashboard is off.