Note:: replace the part with a new one after each removal.
1. Front logo. 2. Radiator grille. 3. Plug of the towing eye socket. 4. Front bumper. 5. Fog lamp cover. 6. Mounting the fog lamp. 7. Fog lamp. 8. Upper guide of the front bumper air duct. 9. Lower front bumper grille. 10. Aerodynamic element.
Removal and installation the front bumper
Removal the front bumper
1. Place the vehicle on a two-post lift.
2. Loosen the bolts securing the front mudguards to the front bumper on both sides of the vehicle.
3. Loosen the bolts securing the partition panels.
4. Unscrew the lower bolts of the front bumper.
5. Unscrew the upper bolts of the front bumper.
6. Unhook the side parts of the front bumper first from the rear (1) and then from the front (2).
7. Partially remove the front bumper forward (3) (this will require two people).
8. Disconnect the connector (4) of the front fog lights.
9. Disconnect the front fog light connector.
10. Remove the front bumper from the car (this will require two people).
Installing the front bumper
Installation is carried out in the reverse order of removal.
Removal and installation the front bumper shock absorbing beam
Removal the front bumper impact beam
1. Remove the front bumper.
2. Remove sound signals.
3. Remove the bolts (1) from the front body panel.
4. Loosen the bolts (2) of the front seat shock absorbing beam.
Installing a front bumper impact absorbing beam
Installation is carried out in the reverse order of removal.
Note: Tightening torque of the front bumper impact beam mounting bolts: 21 Nm.