Removal and installation the fuel filler flap release drive cable
Removal the fuel filler flap release drive cable
1. Remove the fuel tank filler flap release lever (1).
2. Partially remove the left front door seals.
3. Remove the upper trim of the B-pillar of the body (see the corresponding procedure in the section "Salon" below).
4. Remove the lower trim of the B-pillar of the body (see the corresponding procedure in the section "Salon" below).
5. Remove the luggage compartment mat.
6. Partially remove the floor mat.
7. Loosen the bolt (2).
[This note was copied from the resource: renaultbook.ru]
8. Unhook the fuel tank filler flap locking mechanism (3) using a flat-head screwdriver.
9. Remove the locking mechanism drive cable (4) from the filler neck hatch (5).
10. Mark the fuel filler flap release cable routing.
11. Remove the fuel filler flap release drive cable.
Installing the fuel filler flap release drive cable
Installation is carried out in the reverse order of removal.
After installation, check the functionality of the drive cable.