You will need: TORX T20 and T30 wrenches, flat blade screwdriver.
Note. The work is shown for the mudguard and fender liner on the left side of the car. The right mudguard and fender liner are removed and installed in the same way.
To remove the front wheel mudguard, follow these steps.
1. Remove the screw securing the mudguard to the threshold of the body...
2....two screws securing to the front fender...
3.... unscrew the piston fastening to the cross member of the body and remove the mudguard.
4. Install the mudguard in the reverse order of removal.
To remove the front fender liner, perform the following steps.
1. Remove the front wheel mudguard (see above).
2. Using a screwdriver, remove the fender liner holder at the front of the wheel arch.
3. Turn out two screws of fastening of a forward bumper, at the same time fastening a fender liner to a forward wing.
4. Unscrew the caps securing the fender liner to the mudguard of the engine compartment...
5.... and to the body cross member and remove the fender liner.
6. Install the front fender liner and all removed parts in the reverse order of removal.
To remove the rear fender liner, perform the following steps.
1. Turn out two screws of fastening of a back bumper, at the same time fastening and a back fender liner, turn away a cap and fastenings to an arch and remove a fender liner.
2. Install the rear fender liner in the reverse order of removal.