Removing clutch discs
1. Place the vehicle on a two post lift.
2. Remove the manual transmission from the vehicle.
3. Secure the flywheel with special tool Mot. 582-01 (3).
4. To turn away bolts of a pressure disk of coupling and to remove pressure and working disks of coupling.
Installing clutch discs
1. Use a cleaning agent to clean the friction surfaces of the flywheel and the splines of the clutch disc.
Caution: Do not apply grease to the splines of the clutch disc.
2. Install the working clutch disc side (5) to the pressure disk.
6. Install the clutch pressure plate.
7. Tighten the mounting bolts to 23 Nm in diagonal sequence.
8. Install the remaining parts in the reverse order of removal.