1. Clutch cable. 2. Drive cable holder. 3. Drive cable bracket. 4. Dual piping holder 5. Drive cable hub support. 6. Bolt. 7. Drive cable bushing.
Removing
1. Remove the engine protection tray.
2. Remove the left front wheel liner (1).
3. Remove the clutch drive cable of the sleeve stop (2).
4. Disconnect the clutch cable from the release fork (3).
5. Unhook the clutch cable from the holder (4).
6. Depress the clutch pedal to retract the clutch cable into the vehicle interior.
7. Remove the clutch cable from the pedal housing (5), by lifting the pedal and placing the cable perpendicular to the pedal.
8. Push the thrust bushing of the drive cable into the engine compartment.
Installation
1. Pass the clutch cable into the car interior through the partition from the engine compartment.
2. Insert the cable into the groove of the pedal.
Note: Make sure the cable is securely inserted into the groove provided for it in the clutch pedal.
3. Insert the cable into the clutch release fork.
4. Depress the clutch pedal so that the cable stopper is seated in the bulkhead.
5. Fix the clutch cable in the holders.