You will need: all the tools needed to remove the tailgate upholstery and a T20 TORX key.
1. Remove the back door upholstery (see «Removal and installation of an upholstery of a back door»).
2. Fully lower the glass and remove its inner seal.
3. Raise the glass so that the bolts securing the glass holder to the power window slider are opposite the technological holes in the door panel. While holding the glass, unscrew the two screws securing the clip to the slider.
4. Slightly lifting the glass, pull the rubber groove out of its guide.
5. Remove the two screws securing the glass guide to the door panel...
6.... and remove the guide.
7. Remove the glass from the door by pulling it up and turning it in the doorway, as shown in the photo.
8. Establish glass of a back door and all removed details in an order, the return to removal.