2. Beforehand remove the device for installation of a normal backlash between a brake drum and pads. To do this, press the plugs (see illustration), insert the screwdriver blade into the hole and slide the handle towards the outside. The screwdriver presses the handbrake lever on the inside of the brake drum and disconnects it from the brake shoes. Keep pressing on the lever and move the screwdriver back and forth until the lever is fully released.
9.2 To remove the adjustment mechanism, insert a screwdriver into the hole indicated by the arrow (removing the plug first)
3. Unscrew the fastening bolts (use a screwdriver with a curly blade) and remove the cylinder.
4. Install in reverse order. After installation, apply the brake several times to center the brake pads.
5. Install the plugs at the rear of the disc shield and adjust the parking brake as described later.