You will need: two keys «at 16», flat blade screwdriver.
1. Raise and place the front of the vehicle on stands. Remove the wheel.
Attention! Brake the vehicle with the parking brake and place wheel chocks under the rear wheels («shoes»).
Note. Loosen and tighten the wheel bolts only with the vehicle on the ground.
2. Remove the front suspension arm (see «Replacing the front suspension arm»).
3. Pry with a screwdriver...
4.... and remove the fixing ring of the protective cover of the ball joint.
5. Remove the protective cover.
6. Install a suitable size mandrel under the lever at the support location (the inner diameter of the mandrel should be slightly larger than the diameter of the ball joint body) and press the ball joint out of the lever.
7. Lubricate the ball joint (for example, lithol or its analogues).
8. Install the parts in the reverse order of removal.