Removing
1. The brake light switch is located on the pedal bracket under the dash.
2. To remove the switch, reach under the panel, disconnect the wiring connector and unscrew the switch from the bracket.
Installation and adjustment
1. Screw the circuit breaker into position in the mounting bracket.
2. Connect an ohmmeter or a 12V lamp with an independent power source to the switch terminals. Screw in the switch so that the circuit remains open. Depress the pedal gently and check that the chain is closed after the pedal has traveled approximately 5 mm. If necessary, repeat the adjustment.
3. If no ohmmeter and test circuit are available, adjust in the same way by connecting the connector and having an assistant observe the brake lights.
4. At the end of the adjustment, connect the wiring and check the operation of the brake lights.