Removing
Disconnect the hoses from the washer jets at the point (1).
Remove the clamp of the windshield washer fluid supply pipe at the point (2).
Removal with unscrewing of bolts of fastening of a cowl
Remove the hood brace.
Remove:
- hood bolts,
- casing.
Removal with unscrewing of bolts of fastening of loops of a cowl
Remove the hood brace.
Remove:
- hood hinge bolts
- casing.
Installation
Installation is made in an order, the return to removal.
Adjust gaps and protrusion.
Note: The following operations are performed when replacing the hood.
Disassembly
Remove:
- holders (1) soundproofing the hood with (Car. 1363),
- soundproofing the hood (depending on equipment level),
- windshield washer jets on the hood.
Installation
Installation is made in an order, the return to removal.
Adjustment
The position of the hood can be adjusted in two ways:
- hood bolts,
- hood hinge bolts.
The symbols A, B, C, D show how the adjustment can be made.
The black dot in the center indicates the body of the bolt.
The gray part of the symbol indicates the adjustable element.
The white part of the symbol indicates the adjustment zone.
Follow the adjustment sequence (1), (2) And (3).
Adjustment with hood bolts
Loosen the hood bolts (1).
Adjust gaps and protrusions of the hood. Tighten the hood mounting bolts.
Adjustment with hood hinge bolts
Tighten the bolts (2) hood hinges.
Adjust the hood gaps.
Tighten the hood hinge bolts.