Removing
Remove:
- interior rearview mirror,
- lining of the pillars of the opening of the wind window.
Loosen the screw (1).
Detach the decorative trim (2).
Remove the cover.
Partially remove seals (3).
Remove the windshield wiper arms.
Apply protective tape around the perimeter of the windshield opening.
Install the tool on the dashboard.
Cut off the adhesive layer.
Remove the windshield (this operation is performed by two people with an assistant).
Installation
Parts that must be replaced: windshield adjusting shim.
Install new shims and stops.
Glue the windshield. This operation is performed together with an assistant.
Observe clearance and protrusion values:
- between windshield and roof
- windshield - windshield opening pillar
Apply protective tape (6) for fixing the windshield while the glue dries.
Installation is made in an order, the return to removal.