Removing
After removing the wiper arms and the two air intake grilles, remove the A-pillar trims.
Remove top trim B holding gaskets C.
Remove:
- sun visors and their brackets;
- windshield pillar linings;
- interior rearview mirror, disconnect the connectors.
Cover the glass around the perimeter with duct tape.
Install the dashboard guard. then cut off the adhesive layer.
Installation
Put on the top window trim D.
Glue adhesive stop E (in the central part, lower in relation to the opening along the gluing).
Install retaining shims F.
Observe the size of the adhesive layer.
Glue the windshield (together with an assistant).
Evenly distribute the gaps between the glass and the uprights.