Removing
After removal:
- roof hatch gaskets;
- handrails (using the Sag tool. 1597);
- upper facings of the middle pillar;
- side panel facings;
- two rear roof lining clips.
Open the sliding panel.
Using a long flathead screwdriver, pry off the cross member A.
Remove it carefully.
Retract the sunroof trim at the rear, taking precautions. so as not to damage it.
Remove the sunroof trim by sliding it towards the back of the sunroof drive mechanism.
Installation
Install the new sunroof lining, being careful not to tear off the six tabs 8.
Install the drainage crossbar by pressing the lock A.
Check that the sunroof upholstery moves freely before. how to install facings.