1. Remove the generator.
2. Remove the air conditioning compressor.
3. Remove the power steering pump.
4. Remove the multifunction support.
5. Remove the water pump inlet.
6. Remove knock sensor (3).
7. Remove the engine oil level sensor or plug (4) (depending on version).
8. Remove the engine oil pan.
9. Remove the crankshaft oil seal from the gearbox side.
10. Remove the crankshaft seal from the timing drive side.
11. Remove the engine oil filter.
12. Remove the oil pump.
13. Remove the water pump.
14. Remove pistons with connecting rods from all engine cylinders.
15. Remove the crankshaft from the engine block.