1. Turn the wrench to the left to loosen the belt tension. Lock the idler pulley with a 6mm hex socket wrench (1). Remove the accessory drive belt.
Picture 1.
2. Disconnect the fuel line from the fuel rail and unscrew the rear pump mounting bolt.
Figure 2.
3. Remove the power steering pump by removing the two bolts.
Figure 3
Figure 4
5. Turn away bolts of fastening and remove the conditioner compressor.
Figure 5
6. Remove the universal bracket.
Figure 6
7. Remove a branch pipe of the pump of a cooling liquid.
Figure 7