Removal valve springs of the K4M engine (Renault Fluence 1)

To correctly compress the valve springs, it is necessary to center the plunger of the tool (Mot. 1502) on the valve stem.

The valve spring plate must fit into the bore of the pressure sleeve of the device (Mot. 1502).

Remove:

crackers;
valve spring plates;
valve springs;
valves;
oil seals using pliers (Mot. 1335).

This article is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article has been reviewed by editor: Podkrepilov Maxim

Share with friends:

Fluence 1: Engine repair

Checking the mating surface of the cylinder head of the K4M engine
Cleaning the cylinder head of the K4M engine
Cylinder head gasket for K4M engine
Timing chain (M4R engine)
Timing chain (H4J engine)

Checking the height and tightness of the cylinder head of the K4M…
Checking the diameters of the bearing journals and bearing holes of…
Checking the axial displacement of the camshafts of the K4M engine
Checking the valves of the K4M engine
Checking the clearance between the rods and the valve guides of the…