Cleaning the cylinder head of the K4M engine (Renault Fluence 1)

Clean the mating surfaces by applying DECAPJOINT to them (or similar) to remove gasket residues from the mating surfaces of the oil pan and cylinder block.

After applying the composition to the surface to be cleaned, wait about ten minutes, then remove it with a wooden spatula.

Caution: Avoid allowing the cleaning agent to come into contact with the paintwork.

Clean the cylinder head thoroughly so that no particles get into the oil drain and supply channels.

The oil supply channels may become clogged, which will lead to rapid engine failure.

This article is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article has been reviewed by editor: Podkrepilov Maxim

Share with friends:

Fluence 1: Engine repair

Cylinder head gasket for K4M engine
Timing chain (M4R engine)
Timing chain (H4J engine)
Timing belt (engine K4M)
Electrical Wiring and Connectors

Checking the mating surface of the cylinder head of the K4M engine
Removal valve springs of the K4M engine
Checking the height and tightness of the cylinder head of the K4M…
Checking the diameters of the bearing journals and bearing holes of…
Checking the axial displacement of the camshafts of the K4M engine