Removing the fuel rail with injectors
1. Disconnect the negative battery terminal.
2. Loosen two nuts (1) fuel rail protection.
3. Remove fuel rail protection (2).
4. Disconnect the fuel feed line connector from the fuel rail.
5. Install plugs on the opened holes.
6. Disconnect fuel injector connectors (4).
7. Loosen the bolts (5) fuel rail mountings.
8. Remove the fuel rail assembly with injectors by carefully pulling it towards the front of the vehicle.
9. Remove clips (6) and remove injectors (7) from the fuel rail.
10. Install plugs on the opened holes.
Removing the fuel rail with injectors
Note: Be sure to replace with new ones after each removal of the fuel injector seals and retaining clips.
1. Install new seals on each fuel injector.
2. Install the fuel injectors on the rail.
3. Install new clips on each fuel injector.
4. Install the fuel rail with injectors as an assembly.
5. Tighten the fuel rail mounting bolts to 9 Nm.
6. Connect the fuel injector connectors.
7. Connect the fuel feed line connector to the fuel rail.
8. Install the fuel rail protection and tighten the fastening bolts to a torque of 21 Nm.
9. Connect the battery.