Removing
Place the car on a two post lift.
Remove:
- fuel supply line protection nuts (1)
- fuel supply line protection (2).
Disconnect the fuel supply line from the side of the fuel tank at the point (3).
Plug the holes with plugs.
Disconnect the fuel supply pipe from the holders on the bottom of the body at the point (4).
Disconnect fitting (5) fuel supply line to the fuel filter.
Release the fuel supply pipe at the point (6).
Disconnect the fuel supply line through the engine compartment.
Installation
Installation is made in an order, the return to removal.
Make sure that the fittings of the fuel supply line are securely fixed.
Fill the system with fuel using the manual fuel priming pump.
Attention! Make sure there are no leaks.
- let the engine idle for 2 minutes,
- increase the engine speed several times without load,
- turn off the ignition,
- check for fuel leaks.