Contents: Removal 🠛 Installation 🠛
Caution! Do not turn the engine crankshaft in the direction opposite to the direction of rotation.
Caution: Be sure to replace the accessory drive belt.
Removal
Place the vehicle on a two-post lift.
Disconnect the battery.
Remove the top engine covers.
Remove the right front wheel.
Remove the right front fender liner.
Remove the right side reinforcement.
Fig. 2.40. Turning the automatic tensioner of the auxiliary drive belt
Turn the automatic accessory drive belt tensioner clockwise with a 16 mm wrench (Fig. 2.40).
Install the accessory drive belt.
To properly install the accessory drive belt on the pulleys, rotate the engine crankshaft two revolutions.
Installation
Installation is carried out in the reverse order of removal.
[The original can be found on the website: www.RenaultBook.ru]
Connect the battery.