Pic. 4.13. Installing and fixing the wheel on the car: 1 - lower wheel bolts; 2 - upper wheel bolts
Pre-tighten wheel bolts to torque (30 Nm) on the hung wheel, starting with the lower bolts and ending with the upper (pic. 4.13).
Rotate the wheel 180°so that the valve is at the bottom.
Put the car on wheels.
Torque tighten the wheel bolts.
Perform these operations on the remaining wheels of the vehicle.
Pic. 4.14. Wheel rotation: 1 - valve
Carry out a test drive to ensure that the imbalance has been corrected.