Attention! When measuring pressure on warm tires, take into account its increase from heating in the range of 0.2–0.3 bar, in no case lower the pressure.
If the tire size is changed, calibrate the electric power steering ECU: CF088 configuration using the diagnostic tool.
The tightening torque for the wheel bolts is 110 Nm.
The maximum allowable axial runout of the disc when measured by the outer diameter:
- stamped rim - 0.8 mm;
- light-alloy rim - 0.3 mm.
The maximum allowable axial runout when measured along the edge of the disk is 0.7 mm.
Departure:
- stamped rim - 45 mm;
- light alloy wheel - 49 mm.
Table 4.3. Tire pressure
* Alloy wheels.
The given pressure values are the values «when used on highways».