Removing the fuel vapor absorber
1. Place the vehicle on a two post lift.
2. Remove the right front fender from the vehicle.
3. Disconnect the pipelines (1) And (2) fuel vapor recovery systems.
Caution: To prevent contamination from entering the fuel system circuit, place plugs on the disconnected fuel system components.
4. Install the plugs.
5. Loosen the nuts (3) and remove the fuel vapor absorber.
Installation of the fuel vapor absorber
1. Remove plugs.
2. Install the fuel vapor absorber immediately and tighten the fixing nuts.
3. Connect the pipelines of the fuel vapor recovery system.
4. Install the right front fender on the car.