Contents: Removal 🠛 Installation 🠛
Removal
Remove the top engine covers.
Disconnect the wires from the battery terminals, starting with the negative terminal.
Remove the battery.
Disconnect the fuel injection system ECU connectors.
Fig. 2.19. Disconnecting the ECU connectors and removing the wiring harness mounting flange: 1 – connectors; 2 – shelf; 3 – flange
Unscrew the battery shelf mounting bolts and remove the wiring harness mounting flange (Fig. 2.19).
Disconnect the wire harnesses from the battery tray.
Remove the battery shelf.
Fig. 2.20. Removing the injection system ECU: 1 – Injection system control unit
Remove the injection system ECU together with the bracket (Fig. 2.20).
Fig. 2.21. Removing the air intake pipe and air ducts: 1 – branch pipe; 2 – air ducts
Remove the air intake pipe and air ducts (Fig. 2.21).
Remove the air filter housing.
Installation
Install in the reverse order of removal.
Tighten the battery tray mounting bolts (21 Nm).
Connect the wires to the battery terminals, starting with the positive terminal.
Tighten the battery cover mounting bolts to the specified torque (4 Nm).