Attention! The oil pressure is checked on a hot engine (at a temperature of about 80°C).
Examination
Disconnect the battery.
Remove the oil pressure sensor.
Fig. 2.6. Set of nipples for measuring oil pressure
Select the appropriate fittings for connecting the pressure gauge according to Table 2.2 and Figure 2.6.
Install a special device (Mot. 836-05) with appropriate fittings.
Connect the battery.
Start the engine.
Perform a check.
Disconnect the battery.
Remove the special device (Mot. 836-05) with fittings.
Install the oil pressure sensor.
Connect the battery.
Table 2.2. Fittings for connecting the oil pressure gauge
| Engine | Fittings |
| K4J | E + C + F |
| K4M | E + C + F |
| F4R | B + F |
Table 2.3. Oil pressure measurement readings
