Note. When checking, draining and refilling oil, use an 8 mm square wrench for the drain plug.
Oil consumption measurement procedure
Note. The operation is performed on a hot engine after turning on the electric fan of the engine cooling system.
Stop the engine.
Wait two minutes for the oil to drain completely into the engine sump.
Carry out a visual check with an oil dipstick.
Add oil up to the mark «MAXI».
Apply some paint to the filler and drain plugs of the engine sump to make sure they have not been removed later.
Engine oil change
Warm up the engine and check for oil leaks from engine components.
Stop the engine and wait 10 minutes.
Unscrew the plug from the drain hole and remove the cover.
Drain the oil.
Screw the plug into the drain hole and fill with fresh engine oil.
The filling volume of the oil depends on its temperature and the duration of the drain. Use these specifications as a guide only. To reliably determine the amount of oil in the engine, use an oil level indicator.
Warm up the engine and check for oil leaks around the drain plug and oil filter.
Pic. 2.1. Drain and fill plug for K4J, K4M engines: 1 - drain plug; 2 - filler plug 02-001.jpg
Stop the engine and wait 10 minutes (pic. 2.1, 2.2).
Pic. 2.2. Drain and fill plug for F4R engines: 1 - drain plug; 2 - filler plug