Removing
Figure 9.27. Removing the hood lock lever
- in the cabin, disconnect the hood lock lever by removing it from the axle (Figure 9.27);
- remove the left side sill trim;
Figure 9.28. Removing the hood latch lever assembly from the side sill
- unscrew the fastening screw and remove the cable lever assembly from the body (Figure 9.28);
- under the hood, disconnect the cable sheath from the lock and disconnect the cable tip from the lock lever;
- inside the car, carefully pull the cable through the seal in the engine shield, noting how the cable is routed.
Installation
Install in the reverse order of removal. Make sure that the cable seal is correctly installed in the motor shield. Lay the cable in the same way as it was laid before removal.