Removing
1. Remove the hood lock as described in Section Removal and installation of the lock of a cowl.
2. Tie a long piece of twine to the end of the hood latch cable. Release the cable from all mounting brackets and ties.
3. Peel back the door seal strip, then carefully pry off the driver's side sill trim panel to access the hood latch lever mounting screw.
4. Turn away the screw of the lever of a drive of the lock of a cowl, then remove it. Pull the cable from the engine compartment into the passenger compartment. When the end of the twine emerges from the bulkhead, untie the cable and leave the twine in that position.
Installation
1. Install in reverse order. Make sure that the cable is routed correctly and secured with all mounting brackets.