2. Unscrew the mounting pins and remove the fog lights.
3. Unfasten the six clips (H) securing the radiator grille and remove the grille.
4. Release the fog light support from the three clips.
5. Remove the wire harness support support.
6. Disconnect the two clips (I) and six clips (J) and remove the crash energy absorber.
7. Unscrew the two bolts securing the Renault emblem and remove the emblem.
8. Remove the two side trims and one center trim. Unscrew the nut (L) and remove the headlight washer nozzle.
9. Disconnect the clips and remove the frame.
10. Unfasten clips (M) and (N), remove the aerodynamic cover.
11. Assembly is carried out in the reverse order. When installing the fog lamp supports, use special clip fastening pliers Sag. 1521.
12. Adjustment of fog lights is carried out after installation using a screwdriver.
[Information is located on the website: RenaultBook.ru]
Installing washer nozzles
Before painting, drill holes in the bumper panel to install the headlight washer nozzles.
The diameter of the guide hole (1) is 3 mm. The hole (2) is first made with a diameter of 3 mm, then brought to the required size with a conical reamer.
Install the nozzle through the washer and gasket. Tighten the mounting nut.
