Contents: Removal 🠛 Installation 🠛
Removal
- open the hood;
- mark the position of the lock on the panel to make installation easier;
Figure 9.26. Unscrewing the hood lock mounting bolt
- unscrew the two mounting bolts and remove the lock from the panel (Figure 9.26);
- disconnect the cable sheath from the lock, marking its position on the body crossbar;
- disconnect the cable end from the lock control lever and remove the lock;
- before installing the lock, check the condition of its parts and connections, lubricate them with plastic grease.
Installation
Install in the reverse order of removal. Align the marks made during removal. Correctly connect the lock control cable. Adjust the position of the hood by moving the lock if necessary.