Removing the gearshift mechanism
1. Place the vehicle on a two post lift.
2. Loosen the nut (1) traction drive 'gear change'.
3. Loosen the mounting bolts and remove the engine tray.
4. Remove the exhaust pipe.
5. Remove the center console.
6. Loosen the nuts (3) gear shift mechanism.
7. Unhook the gearshift mechanism from the latches (4).
8. To remove the mechanism of a gear change.
Installing the gearshift mechanism
Installation is carried out in the reverse order of removal, taking into account the following:
- Apply silicone grease to the drive link mounting pin on the shift lever.
- Tighten the gearshift linkage nut to 28 Nm.
- Make sure all gears shift smoothly and correctly.