Name of tool and fixtures | Catalog number |
TDC locating pin | Mot. 1489 |
Drive Belt Tension Checker (frequency indicator) | Mot. 1715 |
TDC locating pin | Mot. 1983 |
Hose clamp pliers | Mot. 1448 |
Hose clamps | Ms. 583 |
Hose clamp pliers (big size) | Mot. 1202-01 |
Hose clamp pliers (small size) | Mot. 1202-02 |
Support stand for removing/installing the engine/gearbox assembly | Mot. 1390 |
Flywheel Locking Tool | Mot. 582-01 |
Engine assembly stand | Mot. 1723 |
Traverse for hanging the engine with multiple adjustments and rigging | Mot. 1453 |
Magnetized pointer arm for cylinder head tightening | Mot. 591-02 |
Wrench for angle tightening of the cylinder head | Mot. 591-04 |
Toothed belt tensioner | Mot. 1135-01 |
Toothed belt pretensioning tool | Mot. 1501 |
Drive Belt Tension Checker (frequency indicator) | Mol. 1715 |
Timing gear pulley retainer | Mot. 799-01 |
Camshaft Alignment Template | Mol. 1496 |
Drift for installing camshaft end caps (diameter 57 mm.) | Mol. 1487 |
Drift for installing camshaft end caps (diameter 43 mm) | Mot. 1488 |
Eccentric idler bolt tightening tool (Torx key 8 mm with square 12.7 mm) | Mot. 1368 |
Devices for fixing and adjusting the camshaft pulleys | Mot. 1490-01 |
Fixture for tightening bolts to a certain angle | Mot. 1851 |
Stand for cylinder head | Mot. 1573 |
Drift for installing the camshaft oil seal on the timing drive side (30*42*7) | Mot. 1127-01 |
Pliers for removing oil-reflecting caps | Mot. 1335 |
Tool for pressing oil seals | Mot. 1511 |
Valve spring compressor | Mot. 1502 |
Mandrel for pressing oil seals | Mot. 1759 |
Bearing shell installer | Mot. 1492 |
Piston pin replacement tool | Mot. 574-22 |
Pin A13-01 for installing piston pins | Mot. 574-23 |
B18 ring with V18 washer for installing piston pins | Mot. 574-24 |
Crankshaft bearing shell installer | Mot. 1493-01 |
Mounting eye | Mot. 923 |