Removing and installing the air filter unit
Removing the air filter unit
1. Unhook the breather (3) from the air filter unit (1) and from the front (2)
2. Unhook the clip (4) attaching the air filter unit to the throttle body.
3. Disconnect the oil vapor vent hose (5).
4. Unhook the gearbox breather pipe (6).
Attention: When removing the air filter unit, attention must be paid to the brake pipe of the brake master cylinder. Be careful not to damage the brake pipe of the brake master cylinder.
5. Remove the air filter unit:
- Pry up the air filter unit to remove it from the rocker cover (1).
- Push the air filter assembly to the right to remove from the throttle (2).
Installing the air filter unit
1. Push the air filter assembly to the left to connect it to the throttle body.
2. Lower the air filter unit to connect it to the rocker cover.
3. Further installation is carried out in the reverse order of removal.
Air filter replacement
1. Remove the air filter unit (see above).
2. Loosen the fixing screws (1) air filter unit cover.
3. Clean the air filter housing.
4. Install the air filter in the reverse order of removal.
Caution: If the air filter is not properly installed in the housing, filtered air can enter the engine, which can cause increased cylinder wear or engine failure.