1. Remove the battery (see «Removing and installing the battery»).
2. Remove the crankcase protection (see «Removal and installation of mudguards and engine crankcase protection»).
3. Place a support under the power unit (see «Replacement of the right support of a suspension bracket of the power unit»).
4. Turn out three bolts of fastening of a support to a gear box...
Note. For clarity, the work is shown with the fuse and relay mounting block removed. However, its removal is quite laborious work, therefore, despite the fact that the block somewhat complicates access to the left support, it is not necessary to remove it.
5....two front...
6.... and two rear bolts for attaching the support to the side member of the body...
7.... and remove the support.
8. Install the right powertrain mount and all removed parts in the reverse order of removal.