You will need: keys «on 10», «at 13», socket wrench «at 16».
1. Remove the crankcase protection (see «Removal and installation of mudguards and engine crankcase protection»).
2. Place a support under the engine crankcase through a wooden or rubber spacer.
3. Turn out a bolt of fastening of the holder of a hose of a purge of an adsorber...
4.... move the hose to the side...
5.... and remove the spacer.
6. Turn out two bolts of fastening of a spacer of the right support of the power unit...
7.... and remove the spacer.
8. Turn out five bolts of fastening of the right support of a suspension bracket of the power unit to the engine and a body...
9.... and remove the support.
10. Install the right powertrain mount and all removed parts in the reverse order of removal.