Operation
The cruise control system ensures a constant set speed (over 45 km/h), if the engine can provide it and frees the driver from the need to press the accelerator pedal.
The cruise control system only functions at speeds above 45 km/h.
Variable speed change keys: 1. speed increase or decrease switch; 2.Speed memory switch
1. Turn on
Speed control is programmed using a general switch. located to the left of the steering wheel on the instrument panel, and the light indicator built into the switch lights up.
Changing the speed is possible at any time using two buttons located in the center of the steering wheel.
After reaching the set speed, press the left or right side of the button 1. located in the center of the steering wheel and remove your foot from the accelerator pedal.
2. Speed memorization
The previously selected driving speed remains in memory and can be used at any time by pressing button 2 if the vehicle speed exceeds 45 km/h.
3. Speed change
To decrease vehicle speed in steps, press and hold side «-» buttons 1.
To increase vehicle speed in steps, press and hold side «+» buttons 1 After releasing the button, the car will move at the achieved speed.
At any time, the vehicle speed can be increased by pressing the accelerator pedal.
After releasing the pedal, the cruise control system will reduce the speed to the set value. You should return to the original speed only if the speed matches the specific driving conditions.
Speed adjustment can be automatically canceled (but the speed is stored in memory) under any of the following conditions:
- the brake pedal is pressed.
- button 2 of the switch located to the left of the steering wheel is pressed
4. Shutdown
To turn off the cruise control system, press the button located to the left of the steering wheel. In addition, when the ignition is turned off, the previously set vehicle speed is erased from memory.
Attention. Speed control system (Cruise control) should not be turned on at high traffic volumes or in unfavorable road conditions (icy or wet road, gravel surface).