Contents: Rheostat for changing the intensity…🠛 Ceiling lamp 🠛 Reading lights 🠛 Front and rear side lights 🠛
Upper console: 1. Hazard warning light switch; 2. Three-position ceiling light switch; 3. Front light switch; 4. hatch control; 5. Central locking and emergency engine start secret code switch; 6. central lock receiver
The interior lighting is controlled automatically.
Rheostat for changing the intensity of the instrument cluster illumination
Location of the control knob for adjusting the intensity of the instrument cluster illumination
After turning on the lighting, you can smoothly adjust the intensity of the instrument cluster illumination by turning the knob located on the casing under the steering wheel
Ceiling lamp
By setting the ceiling light switch to one of the positions, you can turn the ceiling light on or off regardless of the position of the doors or control the lighting of the ceiling light using the contact switches on the door pillars.
In the constant light position, remote unlocking of the doors turns on the lamp, while remote locking of the doors turns off the lamp.
In the controlled lighting position, the lamp comes on for 15 seconds after the door locks are unlocked remotely or when the door is opened. It goes out in response to the door locks being locked remotely or when the door is closed.
After turning on the ignition, the lamp slowly turns off.
Reading lights
The reading light located next to the lampshade is controlled by a switch located next to it.
Front and rear side lights
The lights above the doors are controlled by three-position switches. By setting the light switch to one of the positions, you can turn it on or off regardless of the position of the doors or control its switching on using contact switches on the door posts.
Side light and three-position switch