Contents: External lighting 🠛 Overall lighting 🠛 Low beam headlights 🠛 High beam headlights 🠛 Light signal 🠛 Sound signal 🠛 Direction indicators 🠛 Fog lights 🠛 Rear fog lights 🠛 Emergency light signaling 🠛 Headlight corrector 🠛 Interior lighting 🠛 Socket for additional accessories 🠛
External lighting
The light switch control knob is located on the left side of the steering column behind the steering wheel. If you open the car door with the lights on, a sound signal will sound, reminding you to turn off the lights, which in turn will eliminate the useless discharge of the battery.
Overall lighting
Turn the knob forward to the first detent position FP, the mark will align with the symbol -side lights- and the corresponding indicator lamp in the instrument cluster will light up.
Low beam headlights
Turn the knob forward to the second detent position, the mark will align with the FC "low beam" symbol and the corresponding indicator lamp in the instrument cluster will light.
High beam headlights
In the -low beam- position of the switch, pull the lever towards the steering wheel FR to switch on the high beam. The corresponding indicator lamp in the instrument cluster lights up.
To switch to low beam headlights, pull the lever towards the steering wheel again.
Light signal
To turn on the light signal, pull the lever towards the steering wheel AL.
Sound signal
To turn on the horn, press the button located in the center of the steering wheel.
Direction indicators
The direction indicators only work when the ignition is on, regardless of the position of the light switch. To turn on the right turn indicator, move the switch up CD, to turn on the left turn, move the switch down CD.
When the turn signal is on, the indicator lamp flashes. After the turn is completed, the turn signal automatically turns off.
Note: To give a short signal when changing lanes, press the switch up or down until the back pressure increases and hold it in this position - the indicator lamp should flash simultaneously with the turn signal.
Fog lights
View the original source on this resource [Renaultbook.ru]
To switch on the fog lights, turn the central ring of the handle forward to the first fixed position PA. The mark will align with the symbol -fog lights- and the corresponding indicator lamp in the instrument cluster will light.
Rear fog lights
On hatchback-type cars, the taillights are divided into two parts, one light is located on the wing and the other on the tailgate.
To turn on the rear fog lights, turn the central ring of the handle forward to the second detent position FBA. The fog lights only operate when the low or high beam headlights are on.
Note: Turning off the exterior lights will automatically turn off the fog lights and headlights.
Emergency light signaling
The hazard warning lights are activated by a switch located on the center console near the base of the parking brake lever.
When the hazard warning lights are on, all direction indicators flash simultaneously.
The emergency alarm is activated in the following cases:
- when the vehicle stops due to a technical malfunction:
- in case of a traffic accident;
- when reaching the end of a traffic jam. The hazard warning lights also function when the ignition is off.
Headlight corrector
The corrector allows you to smoothly adjust the angle of the headlights in accordance with the vehicle load, thereby reducing the blinding effect of the headlights on the driver of oncoming traffic and improving visibility. The corrector handle is located on the instrument panel to the left of the steering wheel.
The regulator positions correspond to the following vehicle load: position 0 • vehicle is empty or lightly loaded; position 4 - maximum vehicle load.
Interior lighting
After turning on the lighting, you can smoothly adjust the intensity of the instrument cluster illumination by turning the knob located on the casing under the steering wheel.
By setting the ceiling light switch to one of the positions, you can turn the ceiling light on or off regardless of the position of the doors or control the lighting of the ceiling light using the contact switches on the door pillars.
The lamp can be equipped with an additional reading light controlled by a separate switch. In the controlled lighting position, the lamp lights up for 15 seconds after remote unlocking of the door locks or when the door is opened. It switches off in response to remote locking of the door locks or when the door is closed. After switching on the ignition, the lamp switches off slowly. Remote locking of the doors leads to immediate switching off of the interior lighting.
Socket for additional accessories
The socket can be used to power additional accessories with a maximum power of 180 W.