The purpose of air conditioning control in automatic mode is to provide the driver and passengers with stable and efficient comfort, regardless of the environment and operating conditions of the vehicle.
In addition, the regulation provides good visibility through the windows of the car.
Regulation is carried out by an ECU built into the control panel. and injection computer.
The controls for the more sophisticated adjustable air conditioning system are mounted in the center of the instrument panel.
Button 8 for adjusting the amount of air supplied to the passenger compartment
To increase or decrease the fan speed, respectively. press the lower or upper part of the button, as a result of which the amount of air supplied to the passenger compartment increases or decreases. The number of dashes on the display corresponds to the fan speed. For maximum comfort in the vehicle interior, set the fan speed to 1 or 2 dashes on the display.
Air recirculation button 5
Air recirculation eliminates penetrating odors (e.g. in a tunnel or traffic jam) and allows you to accelerate the heating of the air in the car. To renew the air in the passenger compartment and prevent fogging of the windows, it is recommended to periodically transfer the system to the mode of operation with the supply of outside air into the passenger compartment. To turn off the air recirculation mode, press the button again.
Temperature knobs 2 and 4
The air temperature can be adjusted separately for the left and right side of the vehicle. Turn knobs 2 or 4. to decrease or increase the temperature. The set temperature is displayed on the remote control screen.
Button 7 air distribution
By pressing the top or bottom of the button, you can set different modes of air distribution, which are displayed on the remote control screen.
Button 10 for turning on the rear window heater
To defrost the rear window, press button 7. Defrost will turn off automatically after a few minutes or immediately when the button is pressed again.
Button 9 for demisting the windshield, rear window and exterior mirrors i To defrost the windshield, rear screen and exterior mirrors, press button 9. The defrost will switch off automatically after a few minutes or immediately when the button is pressed again.
Button 11 for turning on the air conditioning system
This button confirms the start or stop of the air conditioning compressor. It only functions when the engine is running. The air conditioning system is activated by pressing the button 11 or the -AUTO- button. if temperature programming requires starting the air conditioning system.
In the latter case, it is the system that controls all the parameters that will allow you to get the programmed temperature.
The use of air conditioning allows:
- lower the temperature of the air in the car, heated by the sun;
- reduce the humidity of the air blown into the passenger compartment (this accelerates the removal of moisture from the internal surfaces of the glass). For car cooling. heated in the sun, before turning on the air conditioner, lower the windows to remove heated air from the passenger compartment.
Note. The operation of the air compressor leads to an increase in fuel consumption, therefore, when the required temperature is reached, it is necessary to turn off the air conditioning mode. To ensure the lubrication and tightness of the air conditioning system, it is necessary to operate the system for at least 10 minutes every month, even in winter.
Pollen filter
Outside air, before entering the car interior, is cleaned of dust particles and pollen by the filter. The filter must be replaced regularly. If the supply of external air to the passenger compartment of the car has decreased, it is necessary to replace the filters, ns waiting for the normal replacement period.