1. Never disconnect the battery or voltage regulator from the terminal while the engine is running and, accordingly, the generator.
2. Avoid touching the exciter clamp (pole clamp) generator or a cable attached to it with «weight».
3. Do not confuse both voltage regulator connections.
4. Never operate the voltage regulator if it is connected to «weight» (immediate damage).
5. Do not remove the generator unless the battery has been previously disconnected from the electrical circuit.
6. When installing the battery, make sure that the negative terminal is connected to ground.
7. Never use a lamp connected directly to the mains (110 or 220 V). It is allowed to use the lamp only with a voltage of 12 V.
8. If the battery is being charged with the device when installed, both battery cables must be removed. Connect the positive pole of the charger to the positive pole of the battery and the negative pole of the charger to the negative pole of the battery.
9. Incorrect connection leads to damage to the rectifier and voltage regulator.