- remove the engine oil pan;
Pic. 3.51. Removing the anti-foam plate bolts
- unscrew the pump mounting bolts and the anti-foaming plate mounting bolts in the engine crankcase (pic. 3.51);
- remove the anti-foam plate;
Pic. 3.52. Removing the oil pump from the crankcase
- rotate the pump slightly to free the pump sprocket from the drive chain and remove the pump from the crankcase (pic. 3.52). Reinstall the guide bushings.
Installation order:
- wipe the contact surfaces of the pump and cylinder block from dirt;
- align the pump with the bushings, put on the pump sprocket the drive chain from the crankshaft sprocket;
- screw in two bolts of fastening of the pump the established moment;
- install the anti-foam plate and tighten it with bolts;
- install the engine tray.
Note. Disassembly and check of the oil pump are described in subsection «Lubrication system».