Contents: Removal 🠛 Installation 🠛
| Tightening torques | |
| Oil pump mounting bolts | 25 Nm |
Removal
Place the vehicle on a two-post lift.
Drain the oil from the engine.
Remove the engine oil pan.
Remove:
- oil pump mounting bolts (1),
- oil pump.
Installation
Check the presence of the oil pump mounting bushings on the cylinder block.
Install the oil pump.
Tighten the oil pump mounting bolts to the specified torque (25 Nm).
Install the engine oil pan.
Fill the engine with oil and check its level.