Removing
Remove:
- manual transmission,
- clutch cover with pressure plate assembly.
Lock the flywheel with (Mot: 582-01) (1).
Loosen the flywheel bolts.
Remove:
- flywheel,
- diagnostic tool (Mot. 582-01).
Installation
Check the condition of the flywheel.
Parts subject to mandatory replacement: flywheel mounting bolts.
Wipe with surface cleaner:
- mating surface of the crankshaft on the flywheel in case of reuse,
- surface of the crankshaft flange under the flywheel,
- flywheel thread.
Install the flywheel.
Coat new bolts with FRENETANCH.
Lock the flywheel with a latch (Mot. 58201).
Torque tighten the flywheel mounting bolts in the order shown (55 Nm).
Install:
- clutch cover,
- manual transmission.