Contents: Removal 🠛 Installation 🠛
| Tightening torques | |
| Oil pressure sensor | 33 Nm |
Removal
Place the vehicle on a two-post lift.
Remove the engine oil pan guard.
Disconnect the wiring harness from the oil pressure sensor.
Remove the oil pressure sensor (2) using the tool (Mot. 1495-01).
Original publication on the website www.Renaultbook.ru
Installation
Install the oil pressure sensor.
Tighten the oil pressure sensor to the specified torque (33 Nm).
Connect the oil pressure sensor connector.
Install the engine oil pan guard.