Contents: Removal 🠛 Installation 🠛
Warning! Before performing any work, connect the aftermarket diagnostic tool. establish communication with the injection system ECU and make sure that the fuel rail is not under pressure. Take precautions against possible burns from hot fuel.
Removal
Disconnect the battery. Disconnect the fuel pressure sensor. Unscrew the fuel pressure sensor.
Installation
Replace the sealing gasket.
Screw in the sensor, then tighten it to the specified torque.
Connect the connector.
After performing any work, make sure there are no fuel leaks. Let the engine idle until the electric cooling fan turns on, then increase the engine speed several times at idle.