Remove:
- alternator bracket nut (1) from the cylinder block;
- alternator bracket bolt (2) from the generator;
- generator mounting bracket;
- washer behind the bracket.
Remove:
- oil dipstick;
- bolt (3) fastening the oil dipstick tube to the lifting eye;
- oil dipstick tube.
Disconnect the generator wiring harness (5).
Separate with elastic clamp pliers (small) (Mot. 1202-02):
- fastening clamp (6) heater radiator hose;
- fastening clamp (7) outlet hose of the radiator of the engine cooling system.
Disconnect the following components from the water pump inlet pipe:
- heater radiator hose;
- outlet hose of the radiator of the engine cooling system.
Remove:
- bolt (8) fixing the inlet pipe of the water pump;
- water pump inlet pipe.
Replace after removing the gasket between the inlet pipe and the water pump.
Install the parts in reverse order.