Remove:
- engine undertray protection,
- left front wheel;
- left front fender liner;
- battery;
- battery shelf.
Disconnect the main connector (1) from an automatic transmission.
Install Pipe Pliers (Ms. 583) on the cooling system hoses (2) automatic transmission oil cooler.
With Remote Grip Pliers for Elastic Clamps (Mot. 1448) disconnect the clamps (3) on the cooling system hoses from the automatic transmission oil cooler.
Remove:
- bolts (4) fastenings of an oil cooler of an automatic transmission;
- oil cooler with pipelines;
- automatic transmission oil cooler gasket.
Open the clamps (5) oil inlet and outlet hoses of the gearbox oil cooler.
Disconnect the gearbox oil cooler hoses.
Install two plugs on the oil inlet and outlet hoses of the gearbox oil cooler.
Clean the mating surfaces with a cleaner.
Lubricate the gasket with automatic transmission oil (CVT). Be sure to replace the automatic transmission oil cooler gasket and automatic transmission oil filter.
Install the parts in reverse order.
Torque tighten the automatic transmission oil cooler mounting bolts 4.2 Nm.