Pic. 2.183. Pressing in the crankshaft rear oil seal
Press in the crankshaft rear oil seal with a mandrel (Mot. 1129-01) (pic. 2.183).
Pic. 2.184. Pressing in the front crankshaft oil seal
Press in the front crankshaft oil seal with a mandrel (Mot. 1385) (pic. 2.184).
Install the flywheel with new mounting bolts.
Install the flywheel retainer (Mot. 582-01 or Mot. 1677).
3torque (55 Nm) flywheel bolts.
Install:
- clutch disc;
- clutch cover with pressure plate assembly.
Pic. 2.185. Centering the driven disk with a mandrel
Center the driven disc with a mandrel (Emb. 1518) (pic. 2.185).
Torque tighten (0.8 Nm) clutch cover bolts.
Remove the flywheel retainer.