Removal and installation the horn (Renault Logan 1)

You will need: a 10 mm wrench, a 13 mm socket head.

1. Disconnect the wire from the negative terminal of the battery.



2. Remove the lower part of the left engine splash guard (see "Removal and installation of mudguards and engine crankcase protection").



3. Disconnect the wiring harness connector from the horn.



4. Loosen the nut securing the horn bracket to the vehicle body and remove the horn assembly with the bracket.





5. Loosen the nut securing the bracket to the horn and remove the bracket.

6. Install the parts in the reverse order of removal.

(This note was copied from the resource: «www.RenaultBook.ru»)